Airbus Starts Final Assembly of First A350 XWB

11th April 2012

Final assembly of the first A350 XWB is now underway at the brand new final assembly line in Toulouse. This latest step in the A350 XWB’s progress is achieved as Airbus starts joining the 19.7 metre long centre fuselage with the 21 metre long front fuselage.

The A350 XWB is Airbus’ all new family of mid-size wide body airliners which bring together the latest in aerodynamics, design and advanced technologies to provide up to 25 percent better fuel efficiency and operating costs compared to current aircraft in the same size category. One of the biggest drivers for this fuel efficiency improvement has been the push to minimize the aircraft’s weight with a combination of design optimization and use of advanced, lightweight materials such as carbon composites.

Over 70 percent of the A350 XWB’s weight-efficient airframe is made from advanced materials combining composites (53 percent), titanium and advanced aluminium alloys. The aircraft’s all-new Carbon Fibre Reinforced Plastic (CFRP) fuselage results in lower fuel burn as well as easier maintenance.

 


This first A350 XWB airframe will be used for the static structural tests that all new aircraft undergo as part of their certification process. The assembly of the first flying A350 XWB, MSN1, will start during summer.

The centre fuselage was delivered to Toulouse on Wednesday 4th April 2012 by Beluga from Airbus in St Nazaire, France. The front fuselage was previously delivered from St Nazaire to the A350 XWB final assembly line on the 23rd December 2011. Delivery and installation of the aft fuselage from Hamburg, Germany will take place in the coming weeks, followed by the wings delivered from Airbus’ wing assembly site in Broughton, UK.

The A350 XWB fuselage is made up of three main sections – front, centre and aft. These will be joined together at the first main assembly station, Station 50. The nose landing-gear is also joined here. Once this stage is completed, the fuselage is transferred to Station 40 where the wings and tail sections are joined.  In parallel to this, cabin installation will be carried out simultaneously to the wing-fuselage join up, as well as the “power on” of the aircraft systems. In this way, functional tests can start earlier than on previous programmes.

Press Release issued by Airbus

 

Comments